Evaluation of Buildings and Structures for Heavy Industrial Plants
Condition Assessment of Structural Components of an Industrial Process Plant
The structural condition assessment of buildings and structures of an industrial process plant is essential to the prevention of major problems involving the safety of the workforce, significant maintenance costs, environmental pollution, and production losses. A structural failure increases the risk of injury to plant personnel, and depending on the kind of structure and its function, it can lead to complete shutdown of the plant’s operations. An evaluation prevents unexpected failures, provides a cost-effective solution to maintenance, reduces the risk of injury and life loss to plant personnel, puts the future operating time of the plant in condition of assured reliability, and it could increase the life of the plant’s equipment.
The expanse of our services covers the following:
– Site visit to the Plant to visually inspect the condition of buildings, silos and main structures which could present detected or undetected structural problems, such as: cracks, delaminations, settlements, elements in risk to fall, vibrations, high corrosion, high deformations.
– Review in more detail the technical information of buildings and structures: Construction drawings, specifications, calculations and local codes.
– Perform material testing to certify the quality of the construction materials.
– Diagnose the problems and, in some cases, provide preliminary recommendations to reduce the risk of failure while a more deep analysis is underway.
– Prepare a techno-economical report indicating the cause(s) of the problem, alternatives and recommendations for the most appropriate solutions.
Figure 1: Vehicular Impact Damage
– Provide basic engineering based on our recommendations: drawings, specifications and calculations.
– Supervise implementation of our recommended solutions to guarantee the problem has been solved.
Figure 2: Differential Settlement Solutions
Facilities and Components
– Steel and Concrete Industrial Building and Structures
– Concrete and Steel Silos
– Material Storage: Domes, Bunkers, Longitudinal Storage, Bins, etc.
– Foundations for vibrating equipment: Mills, Fans, and Crushers, etc.
– Galleries, Trusses and Bents for Belt Conveyor support
– Tunnels and Retaining Walls
– Maritime Facilities: Jetties, Docks, Piers and Dolphins
Figure 3: Integrity Verification; Spalling repair
– Cracks and delamination in Concrete Silos
– Buckling deformation on steel silo walls
– Dust and material accumulation in roofs
– Durability problems: high degree of corrosion of steel structures or concrete reinforcement, concrete delamination, old structures deterioration
Figure 4: Buckling Failure
– Settlement of buildings and structures
– Stability problems in buildings and structures.
– Overstressed Beams or Columns, which show high deformations
– High Vibrations in foundations for vibrating equipment
– Loads or conditions not considered in the original design
– Modifications made to structures without an analysis
Figure 5: Roof Buildup Failure
The various operating conditions, age of the plant, errors in the original design of an industrial plant lead to structural changes, which may also lead to costly and in some cases irreparable conditions. PEC Consulting provides comprehensive structural evaluation of industrial processing facilities, both preventative and remedial. This service is offered by our highly- experienced, specialized consultants who will visit the plant, find the problems at incipient stages, prepare a comprehensive report which cause intervention prior to failure, and make sure that your problem is solved.
Figure 6: Dust Buildup in a Belt Conveyor
Main feature contributor: Roberto Jimenez